VPN Installation Instructions (Mac OS X)

• Download the: VpnSetup
• Install using the default settings.

• To set up the client, open the Cisco VPN Client application and click on the “Connection Entries” tab, then the “New” icon.

• Fill in the boxes using the following information:
  • Connection Entry: SCSVPN
  • Description: VPN
  • Host: vpn.csit.fsu.edu
  • The VPN username is "scsuser"
  • The VPN password is "scsvpn"

• Make sure the button next to “Group Authentication” is checked.

• Click on the “Transport” tab.

• Make sure there is a check mark next to “Enable Transparent Tunneling”.
  • Place a check in the box next to “IPSec over UDP”.
  • Place a check next to “Allow Local LAN Access”.

• Click on “Save”.

• Start the connection process by clicking on the “Connect” icon.
  • As the VPN Client negotiates the connection a login box will appear;
  • Enter your SCS username and password.

• Once the connection is established, the bottom of the box will display the connection status and duration.

• If you are unable to establish a connection:
  • Review these instructions
  • Verify the settings

• To contact TSG for additional assistance.
  • Send an email to: ops@csit.fsu.edu

Add a Comment

• Set ALLOWTOPICCHANGE = TechHelpAdminGroup

Last changed: 27 Oct 2006