Turning off the Seminar Room Projectors

The School of Computational Science Seminar Room has two projectors that are located behind the rear projection screen at the front of the room. Control of these projectors is through the AMX Touchscreen Controller located on the left side of the Presenter's desk.

If the AMX Touchscreen is in sleep mode, all you have to do is press on the screen to wake it up. When it wakes up you should see this screen:

Across the top are the Control Group buttons. Press the button marked "Projector Control" and you should get a screen which now looks like this:

Select the projector(s) you wish to turn off. While looking at the Rear Projection screen from the audience area, Projector #1 is the projector on the right hand portion of the screen while Projector #2 is the left hand portion.

Any projectors that are turned on will have a bright yellow power on button to indicate they are now on.

Simply press the "Power Off" button next to the Projector(s) that are turned on to turn off the projector:

-- MattClausen - 26 Oct 2006